hamster Posted November 30, 2014 Report Share Posted November 30, 2014 I've just finished testing my LED driver PCB - 8 channels, each driving two constant current outputs (well, sinks actually). Loaded with 50 ohm sense resistors it gives 13mA per channel. 33 ohm will give 20mA. It is using discrete transistors to allow for higher power dissipation - maybe up to 300mW per channel, so should survive a hard short in in LED chains that that run at up to 15V. If anybody wants a PCB just ask... I can send it air post so you might just be able to use it for your Christmas tree lights Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.