mubase Posted September 21, 2014 Report Share Posted September 21, 2014 Hi all. Its a long time since I used my papilio board but I have cme up with an idea and was hoping someone might be able to tell me if it ossible using a Papilio one 500K and thwe schematic editor.The idea is to build a MIDI to CV controller for use with modular synthesizers. I understand that the schematic editor can enable the user to add as many peripherals as they wish to their design.So would it be possible for me to add say 12 or more DACs to my design for use as outputs having had data converted from a serial port running at the MIDI baud rate (31250 baud) as MIDI messages (note on/off, controller messages etc) to be converted to analog voltages to be sent out of the DACs implemented on the design.The reason for this is that although I have a KEnton MIDI to CV converter it only has 2 channels. I would like loads more channels so I could control my modular through any MIDI platform.Does anyone understand what I am saying and would it be pssible? If someone could help I would be very appreciative... Thanks.Steve. Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.