BOM for wings


os1r1s

Recommended Posts

Does anyone have the BOM for the wings?  I had the following PCBs made and I want to order the components, but unfortunately it does not appear that they are specified anywhere.  The boards I got made were:

 

MicroSD

OV7670

IR

ADC

LCD

 

If someone could help me fill in the details, I would sure appreciate it.  I think the LCD seems the most obvious, but I would like an exact list to make sure I'm not missing anything.

Link to comment
Share on other sites

Jack,

 

The BOM ULP only runs on the schematic, and many of the wings only have the BRD file available.  If you can point me to the schematic files, I can try it again.  After using the BRD file didn't work, I resorted to clicking each item I could see on the board.  That gave me the following list which unfortunately does not contain values.  Any help you can provide is much appreciated.

 

OV7670 Wing
--- C0603
--- C0603
--- ML16 Harting
--- TPS73028 LP3990MF SOT23-DBV
ADC Wing
--- C0603
--- C0603
--- (J2 Pin Header)
--- ADC088S102CIMT TSSOP16
LCD Wing
--- 12 390 ohm resistors
IR Led
--- 3MM LED
--- Chip? TFDU6300
--- Emitter TSOP392
--- 2 smd resistors

Link to comment
Share on other sites

Ok, this is what I have on Digikey:

 

MicroSD

Resistor Net: 4606X-1-473LF-ND

MicroSD Connector: 3M5607CT-ND

OV7670

No BOM was ever made, only a single prototype was made from parts on hand.

IR

IRDA MODULE: 751-1083-1-ND

IR RECEIVER: 751-1389-ND

IR EMMITER: QEC122-ND

ADC

Attached

LCD

Should just be 390 ohm resistors

BPW5011-SPI-ADC-BoM.zip

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.