jecor Posted August 15, 2012 Report Share Posted August 15, 2012 Hi all,I was enjoying playing successfully with a Papilio One 500K board, but after some unknown event (maybe trying a home-made wing that seemed OK?), my board is no longer recognized on the USB by my computer.Symptoms: when I plug the board on the computer, the Power LED is on, Power is supplied to the Wings supply pins (3.3V OK), but I no longer see the board from the computer. I tried even with low level tools, basically nothing is seen from the computer.Any idea how I could repair/debug this? (if this is even possible :-()Thanks,Jérôme Link to comment Share on other sites More sharing options...
Jack Gassett Posted August 15, 2012 Report Share Posted August 15, 2012 Jerome,It sounds like we should just replace it, send me an email to support@gadgetfactory.net with your shipping information and we will work out a replacement.Thanks,Jack. Link to comment Share on other sites More sharing options...
jecor Posted August 15, 2012 Author Report Share Posted August 15, 2012 Hi Jack,thanks for your quick help. Actually, there was some problem with the connector (or the USB cable?). I changed my cable et moved the connector a bit, and now everything is back to normal.Thanks again,Jérôme Link to comment Share on other sites More sharing options...
Jack Gassett Posted August 15, 2012 Report Share Posted August 15, 2012 Great! Glad to hear it was a simple fix.Jack. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.