Physical dimensions?


Guest Bob McCormick

Recommended Posts

Hi Bob,

On mine, the PCB is 69mm x 69mm, but then the power connector sticks out another 4mm.

The height is about 15mm total - including soldering on the back, PCB and then the power connector (which is the tallest device on the board.)

Lee.

Link to comment
Share on other sites

Guest Bob McCormick

Why yes it is!  I was wondering if I should use an alias!  :-)

For some fool reason I've started to get into electronics.  I'm currently building an Arduino control robot, but I'm also on the lookout for my next project. ;-)

Link to comment
Share on other sites

  • 2 years later...

I'm looking for the same info in more detail. I was hoping to mount the Papilio One on a 3D printed part, but am entirely lacking dimensions regarding what appear to be mounting holes. Here is the data I was able to get from carefully measuring the board with a pair of calipers (but I was afraid to touch it with the teeth). Can anyone confirm these? 

 

https://drive.google.com/file/d/0ByYzNrXXLNaOZ1Y4eDVHWWNTdlU/edit?usp=sharing

 

I guessed on the hole sizing because they were placed too near the board jacks to easily get at.

 

Thanks.

Link to comment
Share on other sites

Alright, got it. Thanks.

As a regular CAD user I had a hard time finding out how to measure from hole center to hole center in Sketchup (but it was the first time I have ever used it). The model also completely lacks the IO block and connector data, which will be needed for a case top. I will repost my CAD drawing for those who want it. Is there a better way to post a few pictures? I will also post the stil file I used to 3D print a mounting case and pictures of it.

Link to comment
Share on other sites

  • 8 months later...

Anybody who has a mechanical drawing with all measures between connectors, mounting holes, etc?

I have plans to use a Papilio ONE as a piggy-back board on a "mother board". Therefore I need to know the exact placements of the connectors.

("Future will show" whether I keep the females and turn the board upside down into males on the board, or replace the top-side females with bottom-side males fitting into females on the mother board)

/dindea

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.