IO Issue with CustomCoreAVR8 on 500k board


Guest Blue12

Recommended Posts

Guest Blue12

I am having some issues with the custom core vhdl module on the 500k board. When I modify the avr 8 core to allow for the user core everything compiles but when I run the sketch and hook up the button wing on port B and push the buttons they do not show up in the serial terminal. The pins on port A are not on either. I was just wondering if this was just me or if there was some issue.

Link to comment
Share on other sites

Blue12,

Ok, please take a look at this thread:

http://www.gadgetfactory.net/gadgetforum/index.php?topic=142.15

It looks like there needs to be an update to the AVR8 core after a code contribution. I'm going to start looking at doing the update and getting it checked into git. If you want I'll be on the IRC channel while working through it.

http://www.gadgetfactory.net/index.php?main_page=page&id=42&chapter=40

Jack.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.