RonCK Posted January 24, 2013 Report Share Posted January 24, 2013 Hi Jack et al, I've got my Papilio One 500k hooked up to my Windows 7-32bit laptop and I can download bit streams with the Papilio Loader. When I download the Quick Start/Hello World bit stream I can see that I have 2 instances of the the FTDI USB Serial Converter loaded but I have no COM ports available. I know that the PC has pushed the bit stream as I see the alternating states on the even pins but I can't see how to proceed with the ASCII table part without having a COM handle assigned. I see on this forum that others have had this issue and resolved it but not the necessary techniques to duplicate their success. Any suggestions would be useful. On a slightly related note, how do I configure the Papilio Loader to not automatically exit until I can read the result. I had to lengthen the timeout in the Papilio_Programmer.sh file initial dialog as it was too short even read the options before it started loading, but the other visible timeout in the script seems tied to a failed load only. Thanks in advance. Best regards,Ron Cummings-Kralik Link to comment Share on other sites More sharing options...
RonCK Posted January 25, 2013 Author Report Share Posted January 25, 2013 OK, I fixed the first one myself. The trick was editing properties on the instance of "USB Serial Converter B", "Advanced", Selecting "Load VCP" then unplugging and replugging in the Papilio One. I'm still hoping that someone can help with the second, as it bugs me that I don't get to see the confirmation screen on loading a bit stream. Best regards,Ron Cummings-Kralik Link to comment Share on other sites More sharing options...
Jack Gassett Posted January 25, 2013 Report Share Posted January 25, 2013 Hello Ron, It sounds like you are using the helper script rather then the GUI. If you use the GUI there is a setting under preferences to control whether the window closes or stays open after loading a bit file. For the helper script, if you edit Papilio_Programmer.bat and remove the REM from the last line, leaving pause on the line, you will see the window stay open after every bit file is loaded. Jack. Link to comment Share on other sites More sharing options...
RonCK Posted January 25, 2013 Author Report Share Posted January 25, 2013 Thanks Jack, That fixed the issue with the loader that I had. I'm now working through your tutorials and am having problems with the AVR8 Custom Core. When I first tried it I got an error that looked similar to those referenced here: http://forum.gadgetfactory.net/index.php?/topic/1278-problem-using-custom-build/ and here: http://forum.gadgetfactory.net/index.php?/topic/1299-avr-8-error-with-xilinx-version-134/ except that I'm using Xilinx ISE 14.4. I tried copying data2mem.exe from my Xilinx directory to Arduino/Hardware/Tools/Butterfly_Platform along with the Microsoft.VC90.CRT folder that was there, but I'm now getting this error: Merging Verilog Mem file with Xilinx bitstream:make: *** [pcustom] Error -1073741515 My Google searches are returning nothing as to what that could be. Is anyone else using ISE 14.4 yet and has solved this? Best regards,Ron Link to comment Share on other sites More sharing options...
Jack Gassett Posted January 25, 2013 Report Share Posted January 25, 2013 Ahh, comment out the line that makes a dmp file in the Makefile. It seems to take longer with the new version of data2mem and times everything out. I need to put together a new release with these fixes. Will try to this weekend. Jack. Link to comment Share on other sites More sharing options...
Jack Gassett Posted January 26, 2013 Report Share Posted January 26, 2013 Ok, great news, I just uploaded new version of the Papilio-Arduino IDE.http://forum.gadgetfactory.net/index.php?/files/file/8-papilio-arduino-ide/ There is version 0018g which has fixes for the problems you are seeing and an experimental 1.5 version. Jack. Link to comment Share on other sites More sharing options...
RonCK Posted January 28, 2013 Author Report Share Posted January 28, 2013 Jack, The new version seems to be working for me. Thank you much! Best regards,Ron Link to comment Share on other sites More sharing options...
Dan Roganti Posted May 12, 2014 Report Share Posted May 12, 2014 I have version 2.10.00.50 for the FDTI driver, dated 1/27/2014. The "Load VCP" option was already checked on. I didn't know at first I needed to install their drivers first. When I first tried the board, windows installed some driver that it thought should work and I only had the Serial Port A working. Once I did load the correct drivers, Serial Port B was working fine then. In the Device Manager, under USB Controllers, there are 2 entries, USB Serial Converter A and USB Serial Converter B.Then under Ports, I now have Papilio Pro Serial port [for Bit files] and USB Serial Port [for Console] Dan Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.