Xilinx Programming Cable with Papilio

Jack Gassett

By Jack Gassett

    • If you want to use the Xilinx tools such as EDK, Chipscope, or Impact with the Papilio you need a way to use a Xilinx programming cable. This screencast shows how to setup the Papilio to use a Xilinx programming cable.

The Papilio has a Xilinx JTAG header but the problem is that in the default mode the FT2232D USB chip is connected to the JTAG pins and interferes with programming. What is needed is to put the FT2232 into a mode where the JTAG pins go into High-Z leaving the Xilinx JTAG pins free for the programming cable.

  Report Article
Go to articles Papilio Platform

User Feedback




Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×