anirbax Posted January 18, 2018 Report Share Posted January 18, 2018 Hi, Is it possible to access the SPI flash on the Papillio One board from my Verilog code? Some part of the flash is taken by the bitfile for loading FPGA configuration, and I'd like to use some free flash blocks (a few hundred bytes) My RTL receives data from a UART interface, processes it (SHA-1) and needs to store the signature on non-volatile storage. If not, I will have to get a separate SPI flash chip for storage. Thanks Anirban Quote Link to comment Share on other sites More sharing options...
alvieboy Posted January 18, 2018 Report Share Posted January 18, 2018 Hi, You can store anthing you want after address 0x60000 for Papilio Pro and address 0x46000 for Papilio One. ZPUino also uses this area, so you may need to push it a bit further if you intend to use it as well. Alvaro Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.