island_peter 0 Report post Posted November 30, 2015 Hello all, just found my Arcade Mega Wing and tried the DesignLab Example Sketch/Circuit for the Uno 500k and Arcade Mega Wing.Circuit downloaded succesfully into SPI Flash but uploading the sketch gives me a "cannot enter program mode". I read the PDF for the Wing from the Wiki but found no clue whats happening. Anyone any idea? Tnx for reading Peter Share this post Link to post Share on other sites
Jack Gassett 0 Report post Posted November 30, 2015 I think that error message means that the ZPUino circuit is not actually running on the board... Can you try to remove the Arcade MegaWing and load the circuit and the sketch to see if there is any difference? Jack. Share this post Link to post Share on other sites
island_peter 0 Report post Posted November 30, 2015 Hi Jack, no difference either with Arcade Wing or without. Circuit loads and verifies ok. The Quickstart example as a test works with and without Arcade Megawing CheerioPeter Share this post Link to post Share on other sites
james1095 8 Report post Posted December 7, 2015 The megawing is just a passive adapter, it won't make any difference as far as loading code onto the FPGA. Share this post Link to post Share on other sites
Jack Gassett 0 Report post Posted December 7, 2015 Any luck with this so far? Maybe try a different USB cable or a different USB hub or something? Maybe there is not enough power getting to the board... Also, please try out Romvault Papilio Edition and see if you can load the built in games to the Arcade MegaWing. Jack. Share this post Link to post Share on other sites
Felix 8 Report post Posted December 10, 2015 @Jack - maybe we need to make testbed files for the p500 like i did for the pduo ? @island_peter - if you want to send your p500/arcade megawing to me i can test it for you ( i live near wiesbaden )but as jack said, RomVault - Papilio Edition is a good way to test since it comes with a few free games and it loads them with just 2 clicks. 1 Share this post Link to post Share on other sites
island_peter 0 Report post Posted December 11, 2015 thanks a lot for the hint. I'll try the RomVault and we'll see. I'm able to load any other P500 example so Nice weekend all Cheers Peter Share this post Link to post Share on other sites
Felix 8 Report post Posted December 15, 2015 let us know how it goes Share this post Link to post Share on other sites
island_peter 0 Report post Posted December 19, 2015 Hi all, I just fired up Win10 and tried the ROMVault and it works like a charm. Have a nice weekendcheers Peter Share this post Link to post Share on other sites
Felix 8 Report post Posted December 20, 2015 glad it worked out. have a great weekend also 1 Share this post Link to post Share on other sites
Jack Gassett 0 Report post Posted December 21, 2015 BTW, I put together a tutorial for ROMVault:http://gadgetfactory.net/learn/2015/12/15/rom-vault-papilio-edition-for-papilio-arcade/ Jack. Share this post Link to post Share on other sites
island_peter 0 Report post Posted December 22, 2015 Hi Jack, yes got it. Great things here thanks to your, Felix and other's help. Thumbs up Peter Share this post Link to post Share on other sites
