Wilson

Gameduino verilog code

Recommended Posts

Hi,

I try convert Gameduino code in to Papilio Pro,

keep get this error when doing mapping.

 

 
ERROR:PhysDesignRules:1678 - Issue with pin connections and/or configuration on
   block:<chars/ram0>:<RAMB16BWER_RAMB16BWER>.  When using the DATA_WIDTH_A
   attribute the port A control pins for the RAMB16BWER must be used.
ERROR:PhysDesignRules:1679 - Issue with pin connections and/or configuration on
   block:<chars/ram0>:<RAMB16BWER_RAMB16BWER>.  When using the DATA_WIDTH_B
   attribute the port B control pins for the RAMB16BWER must be used.
ERROR:PhysDesignRules:1678 - Issue with pin connections and/or configuration on
   block:<chars/ram1>:<RAMB16BWER_RAMB16BWER>.  When using the DATA_WIDTH_A
   attribute the port A control pins for the RAMB16BWER must be used.
ERROR:PhysDesignRules:1679 - Issue with pin connections and/or configuration on
   block:<chars/ram1>:<RAMB16BWER_RAMB16BWER>.  When using the DATA_WIDTH_B
   attribute the port B control pins for the RAMB16BWER must be used.
ERROR:PhysDesignRules:1678 - Issue with pin connections and/or configuration on
   block:<picture/ram0>:<RAMB16BWER_RAMB16BWER>.  When using the DATA_WIDTH_A
   attribute the port A control pins for the RAMB16BWER must be used.
ERROR:PhysDesignRules:1679 - Issue with pin connections and/or configuration on
   block:<picture/ram0>:<RAMB16BWER_RAMB16BWER>.  When using the DATA_WIDTH_B
   attribute the port B control pins for the RAMB16BWER must be used.
ERROR:PhysDesignRules:1678 - Issue with pin connections and/or configuration on
   block:<picture/ram1>:<RAMB16BWER_RAMB16BWER>.  When using the DATA_WIDTH_A
   attribute the port A control pins for the RAMB16BWER must be used.
ERROR:PhysDesignRules:1679 - Issue with pin connections and/or configuration on
   block:<picture/ram1>:<RAMB16BWER_RAMB16BWER>.  When using the DATA_WIDTH_B
   attribute the port B control pins for the RAMB16BWER must be used.
ERROR:Pack:1642 - Errors in physical DRC.
 

any one know how to fix it?

or do we have any code already working for Papilio Pro?

 

Thank for any advice.

 

-Wilson

Share this post


Link to post
Share on other sites

Hello Wilson,

 

It was quite an undertaking to get the Gameduino code to synthesize for the Papilio, I have it somewhere but I never got it tested out. I'll see if I can dig it up.

 

Ahh, here it is, not tested.

 

Jack.

Gameduino.zip

Share this post


Link to post
Share on other sites

Hi Jack,

very thank for help,

I try the file you just attached, when I open .Xise file, it ask me to point where source file.

do I missing something?

 

-Wilson

 

Share this post


Link to post
Share on other sites

It came out of the Papilio Schematic Library path, under examples. It must need some relative files that are higher up in the directory structure. I can't look right now for them I'm afraid.

 

Jack.

Share this post


Link to post
Share on other sites
ERROR:PhysDesignRules:1679 - Issue with pin connections and/or configuration on

   block:<i_lcd_controller/lcd_cmd_ram>:<RAMB16BWER_RAMB16BWER>.  When using the

   DATA_WIDTH_B attribute the port B control pins for the RAMB16BWER must be

   used.

 hi i am getting errors i xilinx ise.

can u help me out?

 

thank you

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now