cghw01

Hi Jack, I was able to load a bit file using a Mac, but was unable to observe what was happening on the serial ports like you can on Windows. I have managed to get everything working on a windows machine now, but it would still be convenient if I could use the mac for some tasks such as observing the serial ports. Thanks for your response. Chris

I have just acquired a papilio one and I have been following the instructions here: http://papilio.cc/index.php?n=Papilio.GettingStarted I am using a Mac OS X and have overcome the fix needed to get the FPGA loaded. However, I would like to view the ASCII table output. I have found the serial ports by typing ls -l /dev/tty.* and ls -l /dev/cu.* But the listed serial ports do not seem to correspond to anything to do with the papilio (Bluetooth, my mobile phone and one other). They are listed below /dev/tty.Bluetooth-Incoming-Port /dev/tty.NokiaE5-00-DataTransfer-1 /dev/tty.Bluetooth-Modem /dev/tty.Slim-DataTransfer /dev/tty.Nokia302-COM1 I have used Putty to attempt to connect to them anyway - just in case - but to no avail. Can anyone suggest what I should try next? Thanks Chris