• Content count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About joesugar

  • Rank

Profile Information

  • Gender Not Telling
  1. USB controller / wing

    Wow, this is exactly the thing I'm looking for for a project of mine. Looking forward to see how it progresses.
  2. I've been working this area on a Papilio One, mostly on the transmit side. So far I've put together an interface for a high speed D2A and have implemented an amateur radio PSK31 modulator. I'm currently working on an I/Q modulator using the CORDIC algorithm. The plan is to read IQ data from a Teensy via an I2S interface and have it function similar to a USRP but at lower bandwidth and frequencies. I've written up the PSK31 modulator at have a bunch of blocks in my githup repo at Drop me a note if you'd be interested in trading project ideas.
  3. Papilio Digital Audio Input?

    Thanks Jack, I'll take a look at it. Joseph
  4. Hi guys, Anyone here ever do any work getting digital audio data into a Papilio? I'm working to create a waveform generator for amateur radio use using the Papilio One. The idea is to accept data from another computer in I/Q format and upconvert it in the FPGA to produce a signal in the 3 - 30 MHz range. Think a lower-frequency version of the GNU Radio USRP. I'm at the point where I need an interface to read in the I/Q data and am leaning toward creating a block that will impersonate the I2S interface of an audio codec. I'd be satisfied with a bandwidth of around 50 kHz (for now ) and I like how I2S explicitly identifies the right/left channels. However, I'm open to other ideas and thought I'd see if anyone here has done something similar before committing myself. Thanks for any suggestions, Joseph
  5. The quick answer is no. Signal assignments within a process are all done in parallel and for the case you've given, the assigned values are those that exist at the time of the clock edge. I_dataD takes two cycles to propagate to O_dataA because on the first rising edge of the clock I_dataD is latched into regs and O_dataA takes on the value that was in regs when the clock edge occurred. It isn't until the next clock edge (the second) that the original value of I_dataD is available in regs to be latched into O_dataA. Kind of like a bucket brigade.
  6. I've started converting some of the Wishbone cores I've written in the past for use as DesignLab libraries. So far I have a simple numerically controlled oscillator and am working on updating an interface for the WM8731 audio codec. As part of this, I put together a short explanation of the work flow I use to convert my Wishbone cores for use in DesignLab and posted it at (Sorry, no video.) I'd appreciate any comments or suggestions for improvements. Thanks, Joseph
  7. Papilio Sigma-Delta ADC

    I was thinking about converting the signal to a single-bit data stream using a sigma-delta circuit, then use a digital down-converter to move the frequencies of interest down to baseband before filtering. Since it's similar to a sigma-delta ADC I hoping to get similar performance.
  8. Papilio Sigma-Delta ADC

    You're correct, I have the first two but WOW, how did I miss the third? My original idea was to use a direct conversion receiver feeding the ADC but downconverting the sigma-delta bit stream directly within the FPGA is something that never occurred to me. Definitely going to pursue this. Thanks for the information.
  9. Papilio Sigma-Delta ADC

    Hello everyone. I've had a Papilio One for a while now but this is the first time I've had a question I'm hoping some of you can help with. I'm working on implementing an amateur radio PSK31 transceiver in a Papilio One using the ZPUino soft core. I have the transmit portion working and have started working on the receive portion. To minimize the external hardware required I'd like to implement a sigmal-delta A2D converter. I've run across lot's of articles that discuss the theory but no actual code (be it Verilog or VHDL). Has anyone here implemented such a beast? Can you point me in the right direction for examples I can use as a basis? Thanks for any help or direction you can provide, Joseph