neslekkim

Members
  • Content count

    189
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by neslekkim

  1. neslekkim

    Designlab 1.0.5 sketch compilation problem.

    Cool, I need to get that stuff up, and start my retrocade again. Have ordered some usb-midi cables to see if I can control it that way
  2. neslekkim

    Designlab 1.0.5 sketch compilation problem.

    And Pro is fully supported as well?
  3. neslekkim

    Designlab 1.0.5 sketch compilation problem.

    So with the new designlab 1.0.7, all of the stuff for retrocade is ported and running with all fixes ? I have papilio pro+retrocade, but seemed like the retrocade project derailed for some time ago, but since Duo is finished, maybe there is hope that retrocade will work again. And, is the retrocade compatible with the Duo?
  4. neslekkim

    RetroCade 1.1 - SID analog filters and SID player!

    Did this happen?
  5. neslekkim

    Propeller 1 open source

    I found that Parallax have opensourced its propeller1, with verilog files and all, wonder how this will work on the papilio/pipistrello? http://www.parallax.com/microcontrollers/propeller-1-open-source
  6. neslekkim

    Propeller 1 open source

    So it needs atleast an LX25?, on the de0, they said that one need to remove some of the character rom, to be able to make it fit, removing core's might defeat the purpose somewhat? Would be interresting to see what performance one could get on the pipistrello.. So the de0 is infact bigger than the spartan after all?, hm..
  7. neslekkim

    The next generation Papilio - help me shape it.

    Dangerousprototypes have also have rounds and rounds about this usb problem: http://dangerousprototypes.com/2012/10/03/open-hardware-summit-2012-usb-and-open-hardware-presentation/
  8. neslekkim

    The next generation Papilio - help me shape it.

    Teensy 3.1 switched from black to green due to problems with the soldermask..
  9. neslekkim

    The next generation Papilio - help me shape it.

    Aggreed, i ripped off the USB connector on my Mojo which is black pcb, and it's almost impossible to see where the traces go for repair.. It kinda looks cool though, But I like the red color better.
  10. neslekkim

    The next generation Papilio - help me shape it.

    Wonder what they did on this then? http://embeddedmicro.com/development-boards/mojo-v3.html
  11. neslekkim

    The next generation Papilio - help me shape it.

    Lot of discussions about this on dangerousprototypes and Nick from ArachnidLabs also tried: http://www.arachnidlabs.com/blog/2013/10/18/usb-if-no-vid-for-open-source/ But, if you are using pic or ftdi chips, I thought you where allowed to use theirs vid/pid?
  12. neslekkim

    The next generation Papilio - help me shape it.

    Have you seen this? http://dangerousprototypes.com/forum/viewtopic.php?f=68&t=5755
  13. neslekkim

    The next generation Papilio - help me shape it.

    1) switcing to xml enables other software to read the files, not locked in to cadsoft anymore. 2) Really two year old mac cannot run this?, my computer is from 2007 and runs it very smooth..
  14. neslekkim

    The next generation Papilio - help me shape it.

    aha, I just remembered the wiggles on the Pipistrello, I thought Eagle and such could make such differential pairs. Is it only important to match each pair, or all pairs for say hdmi?
  15. neslekkim

    The next generation Papilio - help me shape it.

    Is the length of the traces equal on the differential pairs?, looks like some are longer?
  16. neslekkim

    Ethernet Phy + Magnetics + RJ45 Wing

    Yes, found it active yesterday and pulled the trigger, no use for it yet, but who know..
  17. neslekkim

    Ethernet Phy + Magnetics + RJ45 Wing

    The ethernet wing that is in the shop now (But not buyable.. ) is that this wing?
  18. neslekkim

    ADAU1761 Audio codec.

    If the choice of chip is not done, have you seen this? http://www.pjrc.com/store/teensy3_audio.html
  19. neslekkim

    The next generation Papilio - help me shape it.

    Cool, put this into an arcade stick, and one have nice portable game setup
  20. neslekkim

    The next generation Papilio - help me shape it.

    Tinypipi with micro hdmi?
  21. neslekkim

    ADAU1761 Audio codec.

    I don't have Cameo, they would be very expensive to get over here. But it works, there are some various scripts that they have used, various types of vinyl that works better than others and so on, I would recomend you to read it, even if it is long.
  22. neslekkim

    ADAU1761 Audio codec.

    Cameo?, read here: http://dangerousprototypes.com/forum/viewtopic.php?f=68&t=5341
  23. neslekkim

    ADAU1761 Audio codec.

    I noticed that they have some various versions of the same thing, various pad sizes, pitches etc, but looking at the datasheet narrowed it down to those. I typically send them an email when I'm not sure, and they check for me so I get the right thing, good people.
  24. neslekkim

    ADAU1761 Audio codec.

    you can buy stencil for the chip alone here: http://www.proto-advantage.com/store/product_info.php?products_id=3250020 Or an kit with protopcb, paste, squeegee etc: http://www.proto-advantage.com/store/product_info.php?products_id=3050020 Or for prototyping, I usually order like this: http://www.proto-advantage.com/store/product_info.php?products_id=3150020 and fill in the digikey number, and after some days you have it soldered for you.
  25. neslekkim

    The next generation Papilio - help me shape it.

    regarding "standard hole pattern", It's the distance between holes that is important, not distance from the corners. So if the holes fits on an 5x5mm grid for instance, not sure about others, but i use tamiya plates http://www.pololu.com/product/734 and http://www.pololu.com/product/79