Huy Nguyen Posted September 18, 2017 Report Share Posted September 18, 2017 I just bought Papilio Pro with the LogicStart Shield. Installed Driver to Windows 10 OK. Board recognized as COM 7 and COM 8 for the Papilio Pro Board. Papilio Loader for Windows is also installed OK. Papilio Pro LX9 QuickStart bit file is also verified board is recognized So next are DesignLab IDE and Web Pack ISE Installations ? Please help me to start for both Papilio Pro and LogicStart Shield since I am very new with the FPGA and your boards and I am very interested of learning to put them to work. How can I verify both are working, please ? Regards, Quote Link to comment Share on other sites More sharing options...
james1095 Posted September 18, 2017 Report Share Posted September 18, 2017 At the very least you'll need to install ISE and you'll need the Papilio Loader application to load the bitfile. DesignLab is optional, I've never used it but it's supposed to be an easy way for beginners to get going. Quote Link to comment Share on other sites More sharing options...
Jack Gassett Posted September 18, 2017 Report Share Posted September 18, 2017 I would start out with tutorials at the learn website: http://learn.gadgetfactory.net/ Download DesignLab and try out the Papilio Pro examples there. Then check out the free eBook: Quote Link to comment Share on other sites More sharing options...
james1095 Posted September 21, 2017 Report Share Posted September 21, 2017 There's another great book called Free Range VHDL, I found it to be tremendously helpful once I got started. What I did was read the whole book through from cover to cover without worrying too much about soaking it all in, then I went back and started going through the examples and referring to other sections as needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.