Kevinmoonbat Posted October 8, 2016 Report Share Posted October 8, 2016 Hi New to FPGA's and would like to know if there's a way to connect a light sensor to a Papilio one, i have seen some tutorials for the Arduino, but have found no information to do the same with the Papilio. I really want to know how to measure an objects colour with a sensor connected to a papilio one or other FPGA and have the reading in RGB Quote Link to comment Share on other sites More sharing options...
Jack Gassett Posted October 10, 2016 Report Share Posted October 10, 2016 Hello Kevinmoonbat, It looks like there is an I2C based Color Sensor that should work just fine with the ZPUino. https://www.adafruit.com/product/1334 Please take a look at the Nintendo WiiChuck Example in DesignLab for an example of using an I2C device on your Papilio board. Keep us posted about your progress and please feel free to ask any questions. Jack. Quote Link to comment Share on other sites More sharing options...
james1095 Posted January 11, 2017 Report Share Posted January 11, 2017 Any sensor that puts out a digital signal can be used, the challenge is writing the HDL to talk to it, and that depends heavily on the specific sensor being used. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.