Hans Klammer Posted June 8, 2016 Report Share Posted June 8, 2016 Gentlemen: I'm using a Xilinx programming pod (platform cable usb II) to program the Flash on the Papilio ONe, via the Jtag interface I watch a video online and have put the FT2232 in Optoisolate mode. I can run debug check and the Spartan 3E is recognized. Now... I want the program the Flash (SST25VF040B) on the board. When you select the flash from the ISE Impact tool, there is NO SST25VF040B to select from....Has anyone tried this?? If so what part did you select?? Thanks Hans Quote Link to comment Share on other sites More sharing options...
Jack Gassett Posted June 8, 2016 Report Share Posted June 8, 2016 Hans, I'm afraid Xilinx's impact tool does not support the SST24VF040B chip used on the Papilio One... You can program a bit file directly to the FPGA or use chipscope and the edk, but the impact tool does not support the SPI flash chip. Jack. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.