azdenek Posted November 1, 2015 Report Share Posted November 1, 2015 I'm just getting started with the Papilio One and I noticed something that I thought I would share in case someone else runs into the same thing. When I click on the link in DesignLabs to Define the Circuit for the Papilio One 250k: sketchdir://circuit/PSL_Papilio_One_250k.xise I got a message from the ISE application that the file could not be found. Looking in the circuit folder it turned out that the letter 'k' in the file name was upper case and the link was lower case. Since Linux is case sensitive I guess this caused the file to be not found. Changing the file name to use the lower case 'k' allowed the link to work. Thanks, Andrew Quote Link to comment Share on other sites More sharing options...
Jack Gassett Posted November 2, 2015 Report Share Posted November 2, 2015 Ah, Thank you for the heads up, I just made a ticket on github so I will remember to fix this in the next release:https://github.com/GadgetFactory/DesignLab/issues/32 Thanks,Jack. Quote Link to comment Share on other sites More sharing options...
gigcon Posted June 15, 2016 Report Share Posted June 15, 2016 I ran into the same problem. Unfortunately I didn't see this message before. Even the .bit file is not generated under the correct name. The generated file has the name Papilio_One_250K.bit, but what designLab expects is papilio_one_250k.bit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.