motor controller


pperin

Recommended Posts

I am already using PicDSP33 and or T.I. DSP to control 3 phases PMAC motors.

I like to try the same thing with a Spartan 6 and xapp808 seems to be a good choice but was developed for a Spartan 3 with an

early version of ISE, importing the project (ISE 14.7) and setting the project to Spartan 6 is not easy.

I was wondering if someone has some ideas or has done it ?

 

Link to comment
Share on other sites

After unzipping the xapp808.zip application, ISE does not load the files correctly, I had to "add" source files one by one and I think I am missing some

but when compiling libraries are missing and even trying to add them does not solve the errors, did you try to load the project ?

Link to comment
Share on other sites

xapp808 is creating an embedded microblaze system using EDK (Embedded Development Kit) which is NOT part of the free ISE webkit license.  A stand-alone ISE EDK license is about $500.

Also, the embedded system needs some kind of RAM to use for microblaze code so you would need a board with external RAM like Papilio Duo or Paplio Pro.

 

Magnus

 

Edit: link to EDK product page: http://www.xilinx.com/tools/platform.htm

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.