Papilio not programing


sekyondai

Recommended Posts

Hello,

 

I get the following error from the loader when trying to program the board and nothing gets programmed on the board:

 

 


JTAG chainpos: 0 Device IDCODE = 0x41c22093    Desc: XC3S500E
Using devlist.txt
Created from NCD file: Lab2.ncd;UserID=0xFFFFFFFF
You probably have a broken Atmel device in your chain!
Target device: 3s500evq100
No succeeding device can be identified
Created: 2015/09/23 15:54:12
Bitstream length: 2270208 bits

Uploading "C:\Users\pink\Documents\g\lab2\lab2.bit". Done.
Programming time 551.0 ms
USB transactions: Write 143 read 3 retries 0
 
Any ideas?
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.