Filip Posted April 28, 2015 Report Share Posted April 28, 2015 Hello, Till know I power the board via the FPGA_usb port and the jumper. As far as I understand if I put 5V and GRD to the pwrin pins (and don't connect usb cables) I can provide power without worrying for the jumper position?If I leave the jumper unconnected (and provide power trough pwrin) can I still use the usb ports for UART debugging? Filip. Quote Link to comment Share on other sites More sharing options...
Jack Gassett Posted April 28, 2015 Report Share Posted April 28, 2015 Yes, it should work that way. But beware, there is not protection if you provide more then 5V. Jack. Quote Link to comment Share on other sites More sharing options...
Filip Posted May 1, 2015 Author Report Share Posted May 1, 2015 Thanks Jack,will test my converter first , when I find some free time Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.