Burn of bootloader failed with DesignLab 1.0.3 and DesignLab 1.0.1 on Kubuntu 64 bits


quicky

Recommended Posts

Hi Jack,

 

When trying to restore the AVR bootloader I obtain an error message because file DesignLab-1.0.x/hardware/arduino/avr/bootloaders/caterina/Caterina-Papilio-duo.hex do not exist.

The correct file seems to be DesignLab-1.0.x/hardware/arduino/avr/bootloaders/caterina/Caterina-Papilio-DUO.hex

Coudl you perform the necessary corrections in DesignLab so that it searchs the correct name ?

Link to comment
Share on other sites

Ok, phew these issues are backing up on me and I'm realizing that the Linux releases are more messed up then I realized after I merged in the latest changes for Arduino 1.5.8. I'm working on the problems now but it's getting hard to keep track of all the forum posts. Can you start putting these in the issue tracker on Github so I can keep track of everything?

 

https://github.com/GadgetFactory/DesignLab/issues

 

Thanks!

Jack.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.