Oberon SRAM wing for Pipistrello


mkarlsson

Recommended Posts

Here is a picture of the new SRAM wing specifically designed for Oberon. This setup is much more stable and is more suited for mounting in a box.

oberon4.jpg


* Same 1 MB SRAM circuit as the SRAM wing except that the latch enable signal is combined with SRAM chip enable to free up a signal for nRF24L01+ module enable.
* Mouse and keyboard now powered by +5V
* Header for nRF24L01+ module (or any other SPI module)
* Small riser board used to connect the Pipistrello PMOD connector with the Oberon wing

 

For more info about Oberon see http://www.projectoberon.com/

Magnus

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.