Problems running on Raspbian


fjwmorris

Recommended Posts

I am new to FPGA development and having some issues getting the loader to run. The following is the error I am receiving when I try to run the papilio-prog:

 

pi@raspberrypi ~/Papilio_Files/Papilio-Loader-2.6 $ sudo papilio-prog -h
/usr/local/bin/papilio-prog: 3: /usr/local/bin/papilio-prog: Syntax error: ")" unexpected

 

 

I have installed all the required dependencies and I can run the GUI Loader, any ideas?

 

Thanks

Link to comment
Share on other sites

It should definitely work on the raspberry pi, but its been a long time since I used it so I don't know the answer to your issue off the top of my head... Here are a couple threads dealing with papilio-loader on the pi:

http://forum.gadgetfactory.net/index.php?/topic/1343-papilio-raspberry-pi/?hl=raspberry

http://forum.gadgetfactory.net/index.php?/topic/1345-papilio-raspberry-pi-ideas/?hl=raspberry

 

I know I solved the problem for rPi, I thought it was checked into the latest source code...

 

Jack.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.