mkarlsson Posted May 22, 2014 Report Share Posted May 22, 2014 AFAIK, nobody has implemented support for the advanced triggers in a SUMP client yet which means that there is only support for level triggers. Since edge triggers are really useful I decided to add it to the basic trigger mode in the verilog code as well as implement support for it in JaWi's SUMP client.Here is a screen shot of the trigger setup menu with edge triggers. If the edge bit is set then the value bit means rising/falling edge, else it means high/low level. You can mix and match edge and level triggers. See attached zip file with verilog source (bitfile in the XISE directory): Here is a link to my version of JaWi's client that has support for edge triggers (too big to attach):http://www.saanlima.com/download/ols-0. ... iggers.zip Magnus ols_verilog_release7_3.08.zip Link to comment Share on other sites More sharing options...
Jack Gassett Posted May 23, 2014 Report Share Posted May 23, 2014 Thank you Magnus Link to comment Share on other sites More sharing options...
mkarlsson Posted May 23, 2014 Author Report Share Posted May 23, 2014 Here is an update to the files. I found a bug... Magnusols_verilog_release7_3.08b.zip Link to comment Share on other sites More sharing options...
neganur Posted March 8, 2015 Report Share Posted March 8, 2015 [...] Here is a link to my version of JaWi's client that has support for edge triggers (too big to attach):http://www.saanlima.com/download/ols-0. ... iggers.zip MagnusHi, any chance to host the file again? The old link expired. Link to comment Share on other sites More sharing options...
mkarlsson Posted March 8, 2015 Author Report Share Posted March 8, 2015 Should be there now. Magnus Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.