alex Posted January 18, 2014 Report Share Posted January 18, 2014 Good old Hack-a-Day made me spend more money on this Indiegogo Campaign for a super cheap GPS board. In any case researching the components on that board it seems the Venus 822 GPS chip they they are using is an ASIC that incorporates a Leon3 processor. Tracking that down to the supplier web site I see the VHDL core is downloadable: The LEON3 is a synthesisable VHDL model of a 32-bit processor compliant with the SPARC V8 architecture. The model is highly configurable, and particularly suitable for system-on-a-chip (SOC) designs. The full source code is available under the GNU GPL license, allowing free and unlimited use for research and education. LEON3 is also available under a low-cost commercial license, allowing it to be used in any commercial application to a fraction of the cost of comparable IP cores. The LEON3 processor has the following features:SPARC V8 instruction set with V8e extensionsAdvanced 7-stage pipelineHardware multiply, divide and MAC unitsHigh-performance, fully pipelined IEEE-754 FPUSeparate instruction and data cache (Harvard architecture) with snoopingConfigurable caches: 1 - 4 ways, 1 - 256 kbytes/way. Random, LRR or LRU replacementLocal instruction and data scratch pad RAM, 1 - 512 KbytesSPARC Reference MMU (SRMMU) with configurable TLBAMBA-2.0 AHB bus interfaceAdvanced on-chip debug support with instruction and data trace bufferSymmetric Multi-processor support (SMP)Power-down mode and clock gatingRobust and fully synchronous single-edge clock designUp to 125 MHz in FPGA and 400 MHz on 0.13 um ASIC technologiesFault-tolerant and SEU-proof version available for space applicationsExtensively configurableLarge range of software tools: compilers, kernels, simulators and debug monitorsHigh Performance: 1.4 DMIPS/MHz, 1.8 CoreMark/MHz (gcc -4.1.2) Link to comment Share on other sites More sharing options...
alvieboy Posted January 18, 2014 Report Share Posted January 18, 2014 I know well LEON3 and LEON2, I worked with them for some projects with the European Space Agency. I have most of the code for the GRLIB also, but of course cannot share it with you guys. The cores are however open-source, but you won't want them implemented on a cheap FPGA. The best I got with LEON2 with FPU (Meiko) was ~80MHz on a ML507 board (Virtex-5). For reference, that board costs >$1200. SPARC is an interesting but complex platform. I will not advise any one to work with it in low-level. The register windows and WOF/WUF are a pain. Most of LEON cores (Gaisler) were sponsored by the European Space Agency. ESA uses mostly ERC32 for space, but they are not developed anymore, and LEON3FT is to be used for upcoming missons, once it's approved internally. ESA has also a multi-core project, called NGMP, which is AFAIK based on LEON3. Alvie Link to comment Share on other sites More sharing options...
alvieboy Posted January 18, 2014 Report Share Posted January 18, 2014 Another note: What I really liked in Leon2/3 was the (proprietary) GRMON [1]. This is a full-featured debug interface, which works with several transport mechanisms, like ethernet and RS232. I could have not close the xLuna project without it (and without GRSIM [2]). The best I ever seen, but to be honest was the only commercial one I ever used. I assume ARM debuggers (>$5K for sw and hw) would work even better. Alvie [1] http://www.gaisler.com/index.php/products/debug-tools/grmon, http://www.gaisler.com/index.php/products/debug-tools/grmon2[2] http://www.gaisler.com/index.php/products/simulators/grsim Link to comment Share on other sites More sharing options...
alvieboy Posted January 18, 2014 Report Share Posted January 18, 2014 Update: I still have the Leon2 figures here, with FPU and ethernet: Target Device : xc5vsx50t Number of Slice LUTs: 13,284 out of 32,640 40% Number of occupied Slices: 6,049 out of 8,160 74% Big, big Link to comment Share on other sites More sharing options...
urvashii Posted February 20, 2017 Report Share Posted February 20, 2017 hello, Actually i am working in SPARC V8 .Can u guide me i have the grlib-gpl-1.5.0-b4164 folder .With what u hv worked I want to synthesize the design in XILINX but i am not getting the procedure can u plz guide me Link to comment Share on other sites More sharing options...
offroad Posted February 21, 2017 Report Share Posted February 21, 2017 On 1/18/2014 at 8:11 PM, alvieboy said: ... The best I ever seen, but to be honest was the only commercial one I ever used. I assume ARM debuggers (>$5K for sw and hw) would work even better. ... Just wondering: Do you know the Microblaze debugger that comes with Web-edition Vivado? I've used the basic features (breakpoints, step, edit variables etc) on an Artix. It was surprisingly simple and usable without having read any manual. Link to comment Share on other sites More sharing options...
alvieboy Posted February 21, 2017 Report Share Posted February 21, 2017 No, I never used Microblaze at all. I find the architecture (most notably the function preambles/postambles for C ABI) a bit awkward. And it's commercial Alvie Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.