magnusk

Members
  • Posts

    3
  • Joined

  • Last visited

  • Days Won

    1

magnusk last won the day on March 9 2013

magnusk had the most liked content!

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

magnusk's Achievements

Newbie

Newbie (1/14)

2

Reputation

  1. The Papilio Plus sounded interesting but wasn't available when I started this project and did not have any of the needed interfaces on-board. The Avnet LX9-microboard was also a possibility but the limited user-I/O and the lack of HDMI on-board killed that idea. So the only option left was to make my own board - basically merging the fpga and LPDDR from the LX9-Microboard with the formfactor, wing interface and tool-set from Papilio, then adding all the needed interfaces on-board (and then some more to make it more interesting). The biggest challenge was the 324-ball BGA package which forced me away from the hobbyist PCB vendors (like Seeed studio and OSH Park) to the more traditional (and expensive) PCB vendors that offers the PCB geometry needed for this board (5 mil trace width/spacing, 8 mil holes, 4-layes). In my professional life I have used PCB Universe (http://www.pcbuniverse.com/) for many boards with great success and they have very reasonable prices and an on-line quote and ordering system so it's easy to place an order (disclamer: I have no business interest in PCB Universe, just a happy customer). The quote for this board was $450 for 50 boards, more than I like to spend but still a bargin compared to other options. So far all circuits on the board have been tested OK except for the USB host interface which really need Linux up and running first. The board came out perfect - no cuts or jumpers needed so far. Read more about the board features here:http://pipistrello.saanlima.com My plan is to make this an open-source project once all features on the board have been verified. Magnus Karlsson Saanlima Electronics